FS25 AutoDrive for the map Bergblick v1.0.5.0
FS25 AutoDrive for the map Bergblick v1.0.5.0
AutoDrive course for Bergblick (v1.0.5, May 2, 2025). All routes have been driven, including farms, production facilities, sales points, the biogas plant, and field edge courses. For small/medium vehicles. Cornering speed: 60%. With legend and tips.
AutoDrive course for Bergblick (v1.0.5, May 2, 2025). All routes include farms, production facilities, sales points, the biogas plant, and field edge courses. AutoDrive course for the “Bergblick” map, version 1.0.5 from May 2, 2025
This course was created with AutoDrive 3.0.0.6.
Areas covered:
Two- and single-lane roads
Field roads as secondary routes
Production and sales points
Biogas plant
Two farms
Field edge routes as secondary routes
Legend for waypoints:
< = Unloading in silos/production facilities
> = Loading trailers
</> = Loading/Unloading
(man) = Manual loading/unloading
(F) = Destination point in the field
EK = Purchasing point
VK = Selling point
(Solo) = Use without implements or trailers
Pal. = Pallets
Bal. = Bales
RWD = Reverse
(Gate) = The gate must be opened
(Z) = Field is fenced
Notes on use:
Set cornering speed to 60%
Select the nearest field exit for the hauler
Small to medium-sized vehicles recommended, as some production and sales points are very narrow
Tested with:
Steyr Absolut 6280 CVT and Fliegl ASW 271
Fendt 728 Vario and two Brantner Z 18051/2 XXL Power Flex
Steyr Absolut 6280 CVT and Kaweco Profi II + Bomech Multi Profi 21/15
Lindner Lintrac 130 and Lizard MKS 8
Mercedes-Benz Actros L 1863 with Krampe SKS 30/1050 (not recommended)
Tested with:
Fendt 5275 C SL and Fendt FreeFlow 25 FT
Steyr Absolut 6280 CVT and Fliegl ASW 271
Fendt 728 Vario and two Brantner Z 18051/2 XXL Power Flex
Folder structure of production and sales outlets:
04.01 = KVA = Potato Processing Plant
04.02 = GTM = Grain Mill
04.03 = SPN = Spinning Mill
04.04 = ZKF = Sugar Factory
04.05 = SGW = Sawmill
04.06 = KSF = Canning Factory
04.07 = ZMW 1 = Cement Plant 1
04.08 = ZMW 2 = Cement Plant 2
04.09 = BAK = Bakery
04.10 = MGH 1 = Medium Greenhouse 1
04.11 = MGH 2 = Medium Greenhouse 2
04.12 = GGH 1 = Large Greenhouse 1
04.13 = GGH 2 = Large Greenhouse 2
04.14 = FLR = Butcher Shop
04.15 = MLK = Dairy
04.16 = BGA500 = 500kW Biogas Plant
Notes:
For the “Farmhouse 2” and “Farmhouse 3” sales points, fields 50 and 51 must be purchased.
The wedge silos of the BGA500 cannot be filled automatically because there is insufficient space in front of them.
At Farm 2 (bale storage), the hall door must be opened. AutoLoad unloading is on the right, loading is on the left or can be done manually.
At Farm 1, the workshop is accessible separately through the hall doors. The silo for seed/mineral feed can only be exited through the center of the hall. The middle lane must remain clear.
Installation:
To use the courses, start a new savegame or copy the file “AutoDrive_config.xml” into the savegame folder of the “Bergblick” map.
Recommended Mod
Bergblick
AutoDrive for LS25
alex83we
