FS22 30 Flatbed Autoloading Trailer Pack v1.1.0.3

FS22 Trailers

FS22 30 Flatbed Autoloading Trailer Pack v1.1.0.3


30′ (9.5 meters) Flatbed Trailer With Tipper and Logging Options

– The trailer frame, rims, tipper body, log forks, cover, liquid tank, and liquid tank trim are all color selectable.

The trailer has 6 different body configurations:
– Standard flatbed bale/transport trailer (cost $15,000).
– Tipper body without cover (additional cost $15,000).
– Add a cover to the tipper body (additional cost $1000).
– Log forks (additional cost $1,500).
– Liquid tank (additional cost $10,000).
– Slurry/Digestate Spreader with 24-meter width (additional cost $2,500).
– Can be configured as a flat hitch or a gooseneck trailer hitch. (cost $1,500).
– The gooseneck coupler and pintle hitch height can be adjusted for different vehicle heights.
– A rear trailer hitch is also an option. (cost $100). *Rear trailer hitch is not available with the Slurry Spreader configuration*
– The standard Lizard tires and rims are custom-made.
– The trailer is equipped with ramps for loading and transporting small machinery.
– Can choose standard with ramps or remove the ramps for a credit of $250.
– Custom painted dirt and wear textures.
– There are 2 different tipper capacity configurations, standard (34,650 liters) and with body extension (41,400 liters – cost $2000)
– Can choose between a standard tip height or a lower tip height for tipping inside buildings or structures with low roofs.
– Can be configured with a wooden deck (cost $500) or steel deck, which is standard.
– Added many different colors to choose from in addition to the standard ones.
– Rear work lights.

– Flatbed trailer can be configured to autoload round bales, square bales, and pallets (FS22_aPalletAutoLoader mod is REQUIRED for pallet autoloading to work).
– There are 5 different trailers in this pack.

Bale capacities for the trailers in this pack are:
150 Small Square Bales (1.2 meter Conventional Bales)
24 1.8 meter Square Bales
24 2.2 meter Square Bales
24 2.4 meter Square Bales
18 1.25 meter Round Bales
18 1.5 meter Round Bales
18 1.8 meter Round Bales
4 Round Cotton Bales
2 Square Cotton Bales

To use autoload, key “B” starts and stops loading.
The key “Y” is for unloading bales using the left mouse button to place them where desired or to unload them directly to the bed for manual unloading.
After unloading, key “Y” must be pressed again to “reset” the autoloading process for the next load.

Changelog 1.0.0.1:
-xFixed the issue that tank collisions and triggers were present with other configurations.
-xFixed the issue that Pallet and Bale Autoloading triggers were still present when not configured with autoload.

Changelog 1.0.0.2:
– Added support for FS22_SelectableBaleCapacity mod’s 2x, 3x, and 4x bales.
– Added rear strobe lights. Uses a standard beacon light key to activate.

Changelog 1.1.0.2:
NOTE: The color configuration options have been changed, so your trailer’s colors may not be as they were and may need to be “repainted” with the correct colors.

– Added support for FS22_SelectableBaleCapacity mod’s 1x, 2x, 3x, and 4x liftable bales.

– Fixed issue with the gooseneck coupler and flat hitch attacher not adjusting due to conflicting Key Bindings.
Now, there is a separate section in the in-game Key Bindings page (look for 30′ Flatbed Autoloading Trailer Pack) to set the key(s) to anything that is convenient to the player.

– Added Solid Fertilizer/Lime spreader as an additional configuration (cost $12,000).
– Fertilizer/Lime spreader has variable spreading widths from 12 meters to 42 meters.
– Added “Un-Realistic” fill capacity configurations to the tipper, tank, and fertilizer/lime spreader for those players that do not want to play realistically. (cost $25,000)
– Increased capacity of cotton round bale autoload trailer to 7 bales.
– Replaced strobe lights with custom-modeled ones created by me, and added additional strobe lights on the flatbed frame and spreader.
– Added livestock trailer configuration (cost $8,000).
– Livestock trailer body and decals are color selectable.
– Livestock trailer decals can be configured to have all, none, or anything in between.

Livestock trailer capacities are:
– 12 Cows
– 12 Horses
– 48 Pigs
– 48 Sheep
– 320 Chickens

NOTE: The livestock trailer has a movable dividing floor (middle mouse button or keyboard keys K and M) for the second tier of pigs, sheep, and chickens.
When loading the other animal types (cows and horses) into the trailer, the dividing floor needs to be moved down and out of the way, so the animals will not spawn in the middle of the dividing floor.
The dividing floor should be moved up for loading a full trailer load of pigs, sheep, and chickens or the second tier of animals will appear to be “floating”.

– Added many new options to the new configurations.
– Separated and cleaned up the color configurations to allow for more options, such as being able to have each configuration have its own colors and not need to have them all share one.

Changelog 1.1.0.3:
– Fixed the issue that none of the lights worked when activated.
– Fixed the issue that lime and slurry had no spreading effects.
– Added support for the FS22_UniversalAutoload mod.

NOTE: The FS22_UniversalAutoload mod is not required for bale autoloading to work however for pallets to autoload you will need the FS22_UniversalAutoload mod installed as well.
To use autoload feature with the FS22_UniversalAutoload mod, the trailer’s configuration needs to be set to the standard “Flat Bed” configuration (first body configuration choice).
It is also recommended to configure the trailer without ramps when using autoload.

– Removed dependency on the FS22_aPalletAutoloader mod.
– Removed the autoload pallets configuration since it’s no longer needed when using the FS22_UniversalAutoload mod. (saved configurations may change on existing save games)
– Added real lights to the strobe lights, so they will reflect off the surroundings.
– Added game pad button controls to adjust the dividing floor for the livestock trailer configuration, along with the gooseneck and pintle hitch heights.

Credits:
macktrucker921


What is this Farming Simulator 19 mods | Farming Simulator 22 mods use for:

Farming Simulator game is so great that is hard to believe that it could be even greater. However, it can be if you play this game with mods! You can have more fun simply installing Farming Simulator 19 mods / Farming Simulator 22 mods. The game became so popular because of supporting mods! What is more, all FS19 mods / FS22 mods are completely free. Every mod has different designation and when there’re so many of them, until you’ll try it you can only imagine what the limits of this game are. So many improvements new tractors and more are waiting for you until you download all of Farming Simulator 2019 mods / Farming Simulator 22 mods. Create your own combination of FS 19 mods / FS 22 mods and see how it works in game. Maybe you’re the one who will create a perfect game which doesn’t have any issues. So why don’t you try. Download and install these LS 19 mods / LS22 mods and create your Farming Simulator 19 / Farming Simulator 22 game. Welcome to the biggest Farming Simulator modding community! If you like this mod, please comment bellow.






Best FS22 Trailers mods

Leave a Reply

Do you need any help or to say thanks to the mod author? Just leave a comment below!